Product introduction:
The ultrasonic rubber cutting equipment by ultrasonic transducer, ultrasonic horn, composition tool and drive power. Ultrasonic vibration to produce energy of thousands of times, its biggest feature is not cutting edge. Or, instead of the traditional sense of the edge. Is the use of traditional cutting tool with sharp edge, pressure to cut material. The pressure on the edge point, the pressure is very large, exceeding the shear strength of the material to be cut, the material molecules are pulled apart, being cut off. Because the material is strong pressure hard pull, so cutting tool edge should be very sharp, the material itself is also under more pressure. Not good for cutting elastic material, soft effect, more difficult for viscous materials.
Ultrasonic rubber cutting with blade smooth, reliable, accurate cutting, no deformation, no curling, fluff, spinning, etc..
The main advantage:
1. high precision cutting, sizing constant
2. easy to use in automatic production
3. cutting surface finish, good bonding properties
4. speed, high efficiency, no pollution
1.24h 1.24 hours
1.24 hours of continuous work
2. maximum cutting thickness 5CM
3. the fastest cutting speed of 50CM/S
Product specifications:
Product specifications:
|
项 目
|
说 明
|
|
超声波频率
|
40kHZ
|
|
切割功率
|
200W
|
|
切割刀
|
钛合金，刀宽82.5mm ,190mm
|
|
产品净重
|
10KGS
|
|
可选配电箱
|
数控电箱可调整振幅输出 50%-100%
|
|
电线
|
标准配3米，特殊长度需说明
|
The main application fields of the product:
Ultrasonic rubber cutting equipment is suitable for cutting rubber (applying tire rubber parts: crown, nylon, sidewall, triangle glue, etc.).
In the actual work:
Ultrasonic cutting effect: cutting perfect lines (smooth and smooth cut).
|
